Retina Verification
EyeDentify ICAM 2001
Part Number ICAM 2001
Size 9.25 in. wide
6 in. high
4 in. deep
Weight 2 lbs. 
Power 12 VDC 
1.8 amps peak . 900 ma nominal
Verification time 1.5 seconds
False Rejection Rate 12.4 per cent (one-try) 0.4 per cent (three-try)
False Acceptance 0 Percent
User Capacity 3000 Users
Memory Retention Up to 5 years via the standard internal lithium battery
Transaction Storage 3300 transactions
ID Number Length 1 to 10 digits
Baud Rate 9600 K bps
Communications RS-232, RS-485/422, Wiegand 2-In/ 1-Out
Magstripe 2-In

EyeDentify Retina Biometric Reader

Retinal Pattern (EyeDentify): A person's eye is as unique as a fingerprint and can be used to identify someone. The EyeDentify retinal readers claim to be the most secure biometric identification method. There have been no False Acceptances and fraud seems impossible. Unfortunately the False Rejection Rate is high and the method will not be easily accepted by the general public. Therefore the utilisation of this method seems limited to high-security access control systems such as nuclear reactors or military installations. 
  • False acceptance rate:  No false acceptances; 
  • Vulnerability to fraud: No counterfeits seem possible. False eyes, contact lenses and eye; transplants cannot breach the security of this device; 
  • Ease of use: Difficult to use. Socially difficult to accept because people do not like to have their eyes scanned; 
  • Suitable for everyone: Suitable for everyone with eyes; 
  • Size for storage of identification tokens: 40 bytes; 
  • Long term stability: The retinal vascular pattern is very stable. Only a small number of diseases or injuries will change this pattern; 

  • Proven technology: Used in a fair amount of systems. 

Technical Specifications: 

Features 
 
* Non-Volatile data base storage of up to 3000 enrollees. 
* Two operating modes-Recognition and PIN Verification 
* System Administration prevents unauthorized access to the system and its enrollee data base (called the IBANK) 
* Memory storage: up to 3300 historical transactions are stored in memory for later retrieval or printout 
* Alarms include: tamper, and alarm point 
* 16-key Keypad for PIN verification mode, 16-character display indicates access decision 
* Battery Backed up Real-time clock 
Operating Specifications 
* Maximum number of Enrollees: 3000 
* Enrollment Time: Less than one minute 
* Recognition Time: Dependent upon the number of eye signatures in the data base 
* Verification Time: 1.5 seconds 
* Output ports: RS232 port, fixed at 9600 baud. RS485 user definable 
* False-reject Error Rate: As low as 0.1 % in verification mode.  Dependent upon system threshold settings. 
* False-accept Error Rate: As low as 0.0001% in verification mode.  Dependent upon system threshold settings. 
* Visual Focus Range: Does not require adjustment. -7 to +7 diopters 
* Eye Signature Data Structure: 96 bytes (192 nibbles) 
I/O Capability 
* RS-232 
* RS-485 
* Wiegand (26 bit sensor format) 
    -2 Input 
    -1 Output 
* Magnetic Stripe 
    -2 Input 
* Dallas Touch Memory (Input and Output) 
Environmental Requirements
* Operating Temperature: 0 to 50 degrees c 
* Storage Temperature: -4 to 50 degrees c 
* Humidity: to 90%, non-condensing 

Rayco Security Loss Prevention Systems, Inc.
7748 Gloria Avenue
Van Nuys, CA, USA, 91406

© Copyright  Rayco Security
Loss Prevention Systems, Inc.
1 (818) 779-0900 tel
1 (818) 779-0103 fax
E-Mail: info@raycosecurity.com